2AD160C-B05OA1-BS23-E2N1

Product Description:

The 2AD160C-B05OA1-BS23-E2N1 motor made by Bosch Rexroth Indramat is part of their sturdy 2AD 3-Phase Induction Motors line, leaning on an AC servo build to deliver steady motion in tight spots on a shop floor. This model lines up with a 160 mm frame size and locks in at 22 kW rated power. The motor packs 315 Nm peak torque, so heavy starts or draws don’t pull it down. Rated spinning speed clocks in at 2000 rpm, keeping moves precise. The 105 Nm rated torque provides a good balance where smooth operation is needed, whether running batches or stopping often.

Tough environments ask for good safeguards, which this motor brings with an IP65 protection class. That means dust stays out and water jets aren’t knocking it out, even in corners of a plant where things get messy. To hold steady through long shifts, a blower cooling setup pushes air over the housing and avoids heat spikes from slowdowns. The connection comes by cable box, while brake jobs are covered by a holding brake setup that fits where holding loads are critical. Tucked inside, the incremental encoder answers back on position to make sure movement matches control. Any overheat risk meets a thermal sensor on the inside, triggering a stop if temperatures push too far.

This model weighs its way into zones with synchronized machinery, main conveyor drives, or material lifts that care about accurate feedback every single cycle. The finish doesn’t pick up grime easily, so it's quick to wipe down—or, most days, just stays clean on its own. Fast mounting is helped by a design ready for sturdy install, with the right mix of frame and torque to push lines along without skipping a beat.