2AD160C-B05OA1-BS23-B3N1

Product Description:

The 2AD160C-B05OA1-BS23-B3N1 motor from Bosch Rexroth Indramat sits in the 2AD 3-Phase Induction Motors group, made for applications that toss around medium to heavy loads every shift. The frame size is 160, so it fills out drive panels where extra space or power density are needed. A big advantage on this model comes from the rated power of 32 kW, a number that keeps bigger conveyors, lifts, or machinery rolling without stalls. Under full load, 1500 rpm is the steady pace, and with this size, operation feels smooth even if things start ramping up. Shaft height hits 160 mm, which lines up well for linkage or direct drive.

On what keeps this motor running cool and safe, it has a blower for axial cooling set up with a regression tube, and no corners are cut with the IP65 enclosure—the motor stays protected while fine dust and water spray bounce off. For safety, a PTC thermistor gets built in, sniffing out overtemperature as soon as it creeps up, and saving the rest of the setup from surprise burns or failures. Connections on this design feel robust, and a BS23 encoder is used to keep track of position, speed, and get feedback when tuning systems. It tops out near 198 kg, a good indicator of all the metal inside for reliability.

Industry gear often gets overlooked until a part gives out, but this one puts in the hours without a hiccup. The closed bearing shield means less dirt grinds into the moving bits, and the self-ventilated design also spreads out heat for longer life. Between the flange mounting (B05) and sealed construction, swaps or installations aren't a cause for fuss.