Product Description:

The 2AD160B-B35OR2-BS03-D2N1 is an AC induction motor produced by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. In industrial automation, it serves as a primary rotary actuator for pumps, spindles, and conveyor elements when paired with a compatible inverter. Its three-phase stator generates a rotating field that induces current in the squirrel-cage rotor, allowing machine tools and packaging lines to maintain stable torque across a broad speed range during repeated production cycles.

Heat removal is handled by an axial blower, which forces air along the housing ribs so winding temperature stays within permissible limits during continuous duty. Position and speed signals are delivered through high-resolution motor feedback, allowing the drive controller to respond accurately to changing load conditions. Mechanical integration is simplified by flange and foot mounting, which provides both a centering pilot and base holes for rigid attachment to steel frames. Power conductors enter through a terminal box, separating mains connections from feedback cabling and leaving room for orderly strain relief. The motor also carries vibration grade R, which helps limit transmitted oscillation during high-speed operation.

The motor is supplied without a holding brake, so position retention during power-off must be provided by the drive or an external clamp. Its stator stack corresponds to motor size 160, while length code B gives a medium axial dimension that balances torque potential with enclosure depth. The mains leads use a top-right orientation, which can help when cables must clear nearby tooling or guarding. The output uses a balanced key shaft with a shaft seal, which helps reduce leakage and supports stable torque transmission. Standard bearings support the intended axial and radial loads, and winding code BS matches the electrical characteristics expected by compatible Indramat drive modules. The rear frame is closed and has no second shaft end, which simplifies fan-side guarding and reduces exposed rotating parts.