Product Description:

The 2AD160B-B35OR2-BS03-B2V1 motor is built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It functions as the prime mover in automated machines where constant-speed, three-phase operation is required for conveyors, spindles, and auxiliary drives that run from standard line inverters. In this role, it converts inverter-fed electrical power into steady rotary motion for industrial equipment that must run reliably through repeated production cycles. Its induction design is well suited to applications that prioritize stable continuous operation over rapid indexing tasks.

To handle radial and axial forces, the motor uses heavy-duty bearings that increase service life under continuous load. Thermal management is provided by an Axial Blower, which directs airflow along the housing to keep winding temperature within permissible limits. Rotor position is reported through high-resolution motor feedback, enabling closed-loop speed regulation down to incremental encoder precision. Frame sizing follows code 160, giving the stator a diameter suited to mid-range power outputs without oversizing the installation footprint. The housing supports flange and foot mounting, so the motor can be attached to either base plates or end-bell interfaces on the machine frame.

The length designation B indicates a rotor stack that balances torque density with overall weight, while the power leads exit a top-mounted terminal box so cable glands stay clear of floor debris. Conductors route to the right side of the box, matching the right-side connection direction used for this variant. The motor is supplied without a holding brake, so static position must be maintained by the drive or by external locking elements. Side B is machined without a shaft end, and the primary shaft is supplied without a shaft seal but is balanced with the entire keyed section to limit vibration beyond grade R. The BS winding code pairs the stator impedance with standard 2AD line drives.