2AD160B-B35OB2-BS03-A2V1

Product Description:

2AD160B-B35OB2-BS03-A2V1 is a 2AD servo motor. It is designed by Bosch Rexroth for industrial use. The motor operates asynchronously: its speed is not synced to the input power frequency. A servo controller is used with the motor to monitor and control its operation. Control algorithms on the controller monitor motor feedback and make adjustments to the motor output to ensure its parameters match those programmed during system commissioning. 2AD motors are surface-cooled devices. The blowers for these motors can be ordered in the axial or radial airflow configurations. Multiple shaft designs and two types of bearings are also available. 2AD160B-B35OB2-BS03-A2V1 is a motor with a plain shaft, which is a type of shaft that is suited to applications with higher load requirements. Major advantages of plain shafts include backlash-free operation and a high run quality. Pressure sleeves, tension sets, or similar elements can be used for shaft coupling.

As the shaft lacks a seal, its protection category is IP40. The axial motor blower requires 3-phase AC power. Nominal voltage for the blower is 400 Volts AC or 460 Volts AC. High-resolution feedback ensures accurate motor parameter control. The motor housing features a terminal box for the power connection. The motor housing has separate connections for motor feedback and blower power. All cable connections on the 2AD160B-B35OB2-BS03-A2V1 motor comply with IP65 ingress protection requirements. With heavy-duty bearings, this motor can operate safely and reliably for an extended period of time. It is important to note that the bearings can suffer from wear if the motor lubricant gets consumed. Operation of the motor inside recommended ambient conditions and within the specified axial/radial shaft load limits is critical for ensuring the lubricant lasts longer than the bearings.