2AD160B-B35OB1-BS03-C2N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911254281
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat 2AD160B-B35OB1-BS03-C2N1, part of the 2AD 3-Phase Induction Motors series, is a blower-cooled synchronous AC servo motor. It delivers a rated power of approximately 18.5 kW, a rated torque of 59 Nm, and operates at a rated speed of 3000 rpm. The motor boasts IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD160B-B35OB1-BS03-C2N1 Induction motor is designed to use in industrial automation use. It is the product of Bosch Rexroth and part of 2AD motor series. The motors output is 30 kW. The motor has a base speed of 1500 rpm. The 2AD160B-B35OB1-BS03-C2N1 has a rated voltage of 305 volts.
The 2AD160B-B35OB1-BS03-C2N1 induction motor requires a rated current of 72 A RMS. This motor runs at a maximum speed of 6000 rpm. The level of noise of the motor is 75 dBA. The vibration severity class is S, as per the DIN ISO 2373. The unit insulation has a rating of class F. The thermal response time constant of the motor is 60 minutes. The mass of this induction motor is about 205 kilograms. The motor delivers a basic torque of 191 Nm. The minimal cable cross-section should be 25 mm2. The operating characteristics are 0 to 45 degrees C ambient. The cooling system of 2AD160B-B35OB1-BS03-C2N1 induction motor uses an axial blower for air movement. Air flow direction in the blower is from side B to side A. The cooling air of the motor is about 1120 m3/h. During operation, the power consumed by the blowers is 220 VA. The blower has a nominal voltage of AC 400 volts 50/60 Hz. The motor blower maintains adequate internal temperature control. It allows uniform ventilation of the internal parts. The cooling system increases the thermal control abilities of the motor.
The installation of a 2AD160B-B35OB1-BS03-C2N1 induction motor is possible with the orientation of verticality. To avoid liquids or dust contamination, use shaft sealing. The vertical setup should exclude the entry of water or oil. Ensure the shaft area is sealed during vertical installation. The rotor inertia of this 2AD motor is rated at 0.174 Kgm2.
Frequently Asked Questions about 2AD160B-B35OB1-BS03-C2N1:
Q: What is the power output of the 2AD160B-B35OB1-BS03-C2N1 servo motor?
A: It delivers a continuous 30 kW of rated power, making it suitable for high-demand industrial applications. The motor maintains this output under steady-state thermal conditions.
Q: Why does the 2AD160B-B35OB1-BS03-C2N1 servo motor have a 191 Nm rated torque?
A: The 191 Nm torque enables the motor to handle medium- to heavy-duty mechanical loads. This makes it ideal for high-inertia and continuous-load processes.
Q: Where should the 2AD160B-B35OB1-BS03-C2N1 servo motor be installed to ensure proper ventilation?
A: Install in well-ventilated areas or provide forced cooling, as the heat time constant is 60 minutes. This helps prevent thermal overload during sustained high-power use.
Q: When does the motor reach thermal equilibrium based on its heat time constant?
A: The 60-minute heat time constant indicates thermal equilibrium after about one hour of steady operation. This data is essential for thermal modeling and duty cycle planning.
Q: How does the weight and size of the 2AD160B-B35OB1-BS03-C2N1 motor impact installation?
A: At 205 kg, it requires rigid mounting bases and handling systems. It ensure mechanical alignment is precise to prevent vibration or bearing wear.
