Product Description:

The 2AD160B-B35LB1-BS01-B2V1 is an AC induction motor built by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. It converts three-phase electrical power into continuous mechanical torque for spindles, pumps, and conveyor drives inside automated production cells. When coupled to a matched Rexroth inverter, the unit delivers closed-loop speed regulation that supports long duty cycles and rapid load changes in machining, packaging, and material-handling equipment. Its operating profile suits equipment that must maintain stable speed while process loads vary during normal machine cycles.

Internally, the rotor is carried by heavy-duty bearings that tolerate the radial and axial forces generated by large belt pulls or helical gears. Heat is removed by a built-in Axial Blower that directs airflow along the stator fins so rated output can be maintained without external ventilation. Frame size 160 corresponds to the motor's mechanical size, while length code B provides the lamination stack used for the intended power level. The motor uses flange and foot mounting, enabling either base mounting or face mounting in the machine frame. For electrical termination, the motor uses a terminal box, and the box is positioned on the left when viewed from the output shaft.

The motor is supplied without a holding brake, so static loads must be restrained by the drive or by an external clamp. Power leads exit the housing on side B, a layout that keeps cabling clear of couplings in compact enclosures. Mechanical balance is set to Vibration Grade R, which limits residual vibration after the keyed shaft is balanced as a complete assembly. Winding code BS indicates the resistance and inductance values expected by compatible Rexroth controllers. The motor has no rear shaft end and no shaft seal, which reduces overall length and friction for installations that do not require a sealed output end.