2AD160B-B05OL1-BS07-B2N1

Product Description:

The 2AD160B-B05OL1-BS07-B2N1 is a high-performing 2AD AC motor designed by Rexroth Indramat Bosch that features a BS motor winding. Designed to operate at a wide range, this servo motor can tolerate an ambient temperature range of 0 to 45 degrees Celsius at an installation altitude of up to 1000 meters above sea level. With its well-built motor housing, the 2AD160B-B05OL1-BS07-B2N1 is protected against the penetration of both solid objects and water. As a compact 2AD AC motor, this servo machine supports various orientations of flange mounting. Specifically, this motor can be installed horizontally or vertically, with the shaft side facing either upwards or downwards.

With its winding designation, the 2AD160B-B05OL1-BS07-B2N1 achieves a nominal power of 30 kW during operation. With this nameplate power, the induction motor can deliver a rated torque of 191 Nm. Owing to its high torque capabilities, this AC machine can efficiently drive high radial loads in an industrial system. At best, this machine can operate at a peak speed of 6000 rpm. At this peak speed, however, the motor can only deliver the rated torque. To operate the motor at its maximum torque, the speed has to be decreased to its nominal value.

Similar to other servo motors under the 2AD product line by Rexroth, the 2AD160B-B05OL1-BS07-B2N1 features a low rotor inertia, allowing it to accelerate quickly for its size. Based on Rexroth’s documentation, the 2AD160B-B05OL1-BS07-B2N1 has a rotor moment of inertia of 0.174 kg(m^2). At rated conditions, this three-phase induction motor can draw an RMS current of 72 amperes. To safely conduct this RMS current, the minimum power wire cross section for this motor must be at least 25 square millimeters.