2AD160B-B05OB1-BS06-B2N1

Product Description:

The 2AD160B-B05OB1-BS06-B2N1 from Bosch Rexroth Indramat is a servo motor that belongs to the 2AD 3-Phase Induction Motors family. It has a flange mounting system. It includes a fan to keep it cool and a high IP65 protection rating. The motor has a resolver built in that gives it feedback. The frame size of 160 mm indicates that the motor goes from the mounting face to the shaft centerline, which is about that distance. This size makes it more suited for moderate to high-power tasks. The length code B fits perfectly into Rexroth's internal length-staging chart and tells the exact length of the housing beneath the 160-mm umbrella.

An extended body usually gives more torque or power headroom. If the steps, that were provided, aren’t followed, the built-in interlocks are disabled, or safety characteristic are altered in any form whatsoever, the protective measures will fail to work as intended. Such activities could result to catastrophic device failure, physical harm, major electric shock, or even bodily injury in the worst cases. Feedback Device: A resolver is an analogue feedback part that is attached to the motor shaft.

It provides voltage waveforms that follow the rotation of the rotor with good accuracy, but not to the micron level that is usual in optical encoders. This motor is well preferred as it is strong and works well in steel mills where there is a lot of dust and moisture. The control electronics utilize the angle data it gets in real time to tell the system to change the torque virtually right away. An IP65 designation means that the enclosure prevents all airborne particles and redirects low-pressure water sprayed from any side.