2AD160B-B05OA1-BS03/S001

Product Description:

The 2AD160B-B05OA1-BS03/S001 asynchronous AC motor delivered by Bosch Rexroth Indramat supports a flange mounting style. This motor features reduced balancing. The product’s power connection includes the connections for the NTC thermistor. This device has no holding brake. The unit’s blower connection type depends on the type of power connection. Its blower’s functioning is not dependent on the drive controller. This motor has no labyrinth seal or blower support base.

The product needs to be cleaned regularly to keep it free of excessive chips or dust. This device supports a power connector with a thread. The unit shouldn’t be touched on parts that conduct dangerous voltage. Its mounting must be done by complying with all the dimensions and tolerances. This motor houses no shaft extension. The product’s bearing lubricant gets consumed faster than usual with non-conforming loads. This device’s shaft-hub connection has a friction-locking action. The unit’s power factors must be multiplied if the ambient installation altitude and operating temperature are exceeded. Its shaft portrays a high run quality.

This motor’s cover and housing offer protection against penetration of water and solid objects. The product’s feedback measures the position of the rotor. This device’s air stream is directed from Side B to Side A. The unit’s drive controller highlights an error message if the motor encounters a thermal shutdown. Its feedback eliminates the need for a separate incremental encoder. This asynchronous AC motor’s blower can be dismantled for maintenance purposes. The product can never be put to use without its blower. This device’s power connector is set on the thread of the connective housing in the correct position. The unit’s rotor comprises permanent magnets. Its faulty control results in dangerous drive controller movements.