2AD134D-B35OC1-DS17-E2N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911298930
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat 2AD134D-B35OC1-DS17-E2N1 motor is part of the 2AD 3-Phase Induction Motors series, featuring a synchronous AC servo design and IP65 protection class. It has a frame size of 134mm, a standard length (D), and uses surface cooling. The motor can produce approximately 11 kW of rated power.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth produces the 2AD134D-B35OC1-DS17-E2N1 as a three-phase 248 VAC motor with a power terminal on the top of the motor frame to allow standard cable routing. It has a digital feedback system along with absolute encoder for delivering accurate rotor position information up to 0.0090 degrees to drive controller.
The 2AD134D-B35OC1-DS17-E2N1 motor features a 588.6 CFM air providing axial blower fan for cooling, the blower is configured in a B to A side ventilation setting. The motor offers a vibration limit of 1.8 mm/sec with category R balance and the unit possess standard greased bearings to support a peak speed of 7500 spins/minute. The 2AD motor is designed for continuous-duty cycles and comes with a mechanically half-key balance shaft that is 42 mm thick and it does not come with a sealing ring or side B extension. The rotor inertia is 0.818 kg·ft² and the motor has a thermal time constant of 0.9 h for keeping temperature under control. The 2AD motor uses 18000 W normally to offer a continuous operating speed of 1500 spins/minute and consumes 54.4 A of nominal current to give a turn effect 115 Nm. The 2AD motor supports foot/flange both styles of mounting.
The 2AD134D-B35OC1-DS17-E2N1 motor is equipped with an electrically engaged holding brake that runs on a 24 VDC supply with ± 10% tolerance and it weighs 4 kg. The brake has a holding torque of 100 Nm and possess maximum braking energy of 30000 Ws with a moment of inertia 0.0215 kg·ft². It has an engage time of 110 ms and release time of 140 ms. The 2AD motor has a rated acoustic level of 7.5 (B) at 3.28 ft and it carries a mass of 115 kg.
Frequently Asked Questions about 2AD134D-B35OC1-DS17-E2N1:
Q: How does the absolute encoder enhance the performance of the 2AD134D-B35OC1-DS17-E2N1 motor?
A: The absolute encoder provides high-precision rotor positioning down to 0.0090°, which improves control loop accuracy in closed-loop systems. This allows consistent performance in high-demand motion control.
Q: Why is a 0.9 h thermal time constant important in this motor?
A: A longer thermal time constant ensures the motor's internal temperature rises slowly, allowing better control and reduced thermal stress. This enhances its operational life during continuous-duty cycles.
Q: How does the mechanically balanced half-key shaft affect the motor’s efficiency?
A: The 42 mm shaft with mechanical balancing minimizes vibration during high-speed operation. This results in reduced bearing wear and improved transmission efficiency.
Q: What advantage does the B to A side ventilation offer for the 2AD134D-B35OC1-DS17-E2N1?
A: This directional airflow design enables efficient cooling in confined installations. It prevents heat accumulation in sensitive drive environments.
Q: Why is the motor designed without a sealing ring or side B extension?
A: This design reduces mechanical complexity and cost where these features aren't necessary. It's ideal for applications not exposed to contaminants or requiring rear-side attachments.
