Product Description:

The 2AD134D-B35OA1-DS06-A2N1 is a three-phase induction motor built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It converts inverter-fed electrical power into rotary motion for conveyors, printing cylinders, and other automated stations that need dependable speed control during changing process loads. When paired with a suitable drive and position controller, the motor supports regulated operation that helps production equipment hold repeatable motion and stable cycle timing. This type of motor is well suited to applications that require smooth acceleration and steady running over long production periods.

The motor has a size code of 134 and a length code of D, which indicate a larger frame with an extended active stack for higher continuous output. Heat is removed by an axial blower, so forced airflow supports thermal stability during sustained operation. Motion signals are provided through digital servo feedback, allowing the drive to monitor rotor position and velocity for accurate current control under variable load. The housing is prepared for flange and foot mounting, giving the machine a choice between face mounting and base mounting. This arrangement also helps the motor fit equipment layouts with direct-coupled or base-supported mechanical assemblies.

Electrical power enters through a power plug mounted on the top of the housing and oriented toward side A for straightforward cable routing. The output uses a smooth shaft without a seal, and the motor has no second shaft extension at the rear. This layout keeps the drive end simple and leaves any required external sealing to the surrounding machine design. Standard bearings support the rotor, and vibration grade R keeps running characteristics within the balancing class used for general industrial duty. Because the motor does not include a holding brake, position retention during power-off conditions must come from the drive or external hardware.