2AD134D-B35OA1-CS36-B2N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911288871
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat 2AD134D-B35OA1-CS36-B2N1 Synchronous Servo Motor is part of the 2AD 3-Phase Induction Motors series and features a frame size of 134 mm. It provides a rated speed of 3000 rpm and a rated power of 5.5 kW. Additionally, the motor offers IP65 protection for its housing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD134D-B35OA1-CS36-B2N1 is an asynchronous Bosch servo motor. It supports digital servo feedback for measuring speed and rotor position. The motor sends these measurements to the drive controller, which enables accurate motor control. With an optional brake, the output shaft can be held at standstill until the controller sends a signal allowing the shaft to move. This asynchronous motor does not require maintenance. Data for the motor is valid under the following ambient conditions: 0 to 45 degrees Celsius temperature and 0 to 1000 meters site elevation. Power output of the motor falls outside these specified limits. If only the temperature is outside specified limits, the power output falls by 20% if the temperature reaches 55 degrees. If only the elevation is outside specified limits, the power output falls by 35% at 5000 meters.
If temperature and elevation deviations happen at the same time, the derating factors will multiply, leading to a sharper fall in motor output power. Nominal power output of the 2AD134D-B35OA1-CS36-B2N1 motor is 26 kilowatts. The base speed is 1500 RPM and can reach 7500 RPM when required. Rotor inertia for the motor is 0.118 kg m2. When measured at 1 meter from the motor, the sound pressure level is 75 dB(A). The main shaft is keyed but is without a seal. A full key is used for shaft balancing. Foot mounting and flange mounting are both possible with this motor. A heavy duty holding brake rated for 100 Nm holding torque is installed. The 2AD134D-B35OA1-CS36-B2N1 is cooled by an axial blower producing 1000 cubic meter of hourly airflow. Combined weight of the motor and the holding brake is 139 kilograms.
Frequently Asked Questions about 2AD134D-B35OA1-CS36-B2N1:
Q: What is the motor flange size?
A: The motor flange size is 260 millimeters.
Q: What is the maximum altitude without derating?
A: The maximum altitude without derating is 1000 m.
Q: How much airflow does the blower produce?
A: The blower produces 1000 cubic meters each hour.
Q: What is the protection rating of the cable connections?
A: Protection rating of the cable connections is IP65.
Q: How does the holding brake get the signal from the controller?
A: The signal for the brake is integrated into the main power connector.
