Product Description:

The 2AD134D-B05OB1-CS07-A2N1 is manufactured by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. It converts three-phase AC energy into continuous mechanical rotation for spindles, pumps, and transport rollers in machining and packaging equipment. When paired with a compatible inverter, the motor delivers regulated speed and torque that help keep production cycles synchronized. Its role is to provide stable rotary output in applications that require repeatable motion during extended operating periods.

The motor uses an axial blower to push cooling air through the stator channels and maintain operating temperature under load. Rotor position is supplied by digital feedback with a multi-turn absolute encoder, which provides absolute angle data immediately after power-up. Frame size 134 gives the motor its basic housing diameter, and length code D indicates an extended core for higher continuous output. The housing uses flange mounting, so the motor bolts directly to a machine surface while standard-class bearings support radial and axial forces. The longer core increases the active magnetic length, which helps the motor sustain output during continuous operation. The design does not include a holding brake, and power conductors exit on side B for orderly cable routing away from the mounting face.

Electrical entry is on the top of the housing and uses a keyed power plug that also supplies the blower. The drive end has a smooth shaft without a shaft seal, and the opposite side is supplied without a shaft end. Dynamic behavior follows vibration grade R, which supports operation on lightly damped machine structures. The single-ended shaft layout removes the need for an unused secondary output stub on the rear side of the motor. Top-entry wiring keeps the connection point above the housing, which can simplify cable routing in compact machine layouts.