2AD134C-B35LB1-DS06-B2V1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911286850
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat 2AD134C-B35LB1-DS06-B2V1 motor is part of the 2AD 3-Phase Induction Motors series and features a 134 mm frame size. It delivers a rated power of 4.1 kW, a rated torque of 13 Nm, and has a rated speed of 3000 rpm. The motor is air-cooled with an external fan and is protected by an IP65 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD134C-B35LB1-DS06-B2V1 asynchronous motor device is a compact, easily installed and cost-effective product built by Bosch Rexroth Indramat according to international quality standards. This motor unit is estimated to maintain an efficiency level higher than 90 per cent when it is in operation; it also features a thick and completely enclosed housing unit that is strong enough to provide it with reliable protection against external interference. The output shaft of this motor unit is supported by a balanced key; however, it features no shaft and shaft sealing ring. The ball bearings installed into the 2AD134C-B35LB1-DS06-B2V1 motor unit a heavy duty bearings have a service life of about 30,000 hours. Compared to the standard bearings, these heavy duty bearings are able to support a significantly higher radial force, although this may come at the cost of a reduction in the maximum permitted speed.
The 2AD134C-B35LB1-DS06-B2V1 motor requires a constant rated current supply of 49 amperes, it can also reach a rated speed of 2000 revolutions per minute and supply a rated power output of approximately 20.9 kilowatts. The recommended ambient temperature for this motor is between 0 to about 45 degrees; outside this temperature range, derating should be expected. Operating speed also drops to about 1500 revolutions per minute. Apart from ambient temperature, derating is also caused by the installation and operation of this motor at a height that exceeds 1000 meters above sea level.
The cooling of the 2AD134C-B35LB1-DS06-B2V1 motor unit generally occurs via surface cooling through the aid of an axial air blower. The nominal voltage required by the air blower is about 400 volts, while its power consumption is approximately 170 volt ampere. The blower also produces about 850 meter cube per hour of air volume.
Frequently Asked Questions about 2AD134C-B35LB1-DS06-B2V1:
Q: Why is the 2AD134C-B35LB1-DS06-B2V1 fitted with heavy duty ball bearings?
A: These ball bearings are used for there ability to support large radial loads.
Q: Is the 2AD134C-B35LB1-DS06-B2V1 equipped with an holding brake?
A: There is no holding brake in this motor unit.
Q: What is the best mounting height for this motor for operation without derating?
A: The 2AD134C-B35LB1-DS06-B2V1 is designed to be installed at an height that does not exceed 1000 meters above sea level.
Q: How is this motor cooled?
A: Cooling of the 2AD134C-B35LB1-DS06-B2V1 is done through the axial blower integrated into its housing.
Q: How long is the service life of the bearings in the 2AD134C-B35LB1-DS06-B2V1?
A: The heavy duty ball bearings in the 2AD134C-B35LB1-DS06-B2V1 have an estimated service life of 30,000 hours.
