Product Description:

The 2AD134C-B350B1-DS06-C2N3 is manufactured by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. This product is an AC induction motor intended for closed-loop industrial automation where continuous torque and precise speed control are required. By pairing with matched drive controllers, the unit supplies mechanical power for material-handling, converting, and forming equipment while fitting the standardized flange pattern used throughout the series. Its construction supports high-duty cycles, enabling integration into production lines that must stay online for extended shifts without unscheduled stops.

The motor dissipates heat with an axial blower that forces air along the stator housing, allowing full rated torque even inside compact cabinets. Rotor position is monitored through digital servo feedback, so the associated drive can adjust phase current in real time and hold commanded speed under load changes. A smooth shaft with a shaft seal keeps lubricant inside and airborne contaminants out, minimizing wear on the output journal. Installation flexibility is increased by flange and foot mounting, which lets a machine builder bolt either the face or the base to the frame without adapters. Electrical leads enter on the non-drive end because the power conductors are routed to Side B, keeping high-current wiring away from sensors placed on the front of the machine.

For applications that rely on dynamic braking from the inverter, the motor is supplied without a holding brake, eliminating residual drag when the axis is released. The rotating assembly runs on standard bearings, supporting stable shaft rotation during continuous operation. Main power reaches the stator through a sealed power plug, and the same connector feeds the blower so the enclosure needs only one bulkhead opening. Mechanical excitation remains low because the design adheres to vibration grade S1, reducing transmitted oscillations to adjacent metering or vision equipment.