Product Description:

The 2AD134C-B05OB1-DS06-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat and assigned to the 2AD 3-Phase Induction Motors series. Designed for industrial automation, the motor delivers constant torque for tasks such as material transport and machine-tool spindle rotation when paired with a compatible drive. By receiving three-phase power and feedback signals through the connected system, it can be integrated into coordinated multi-axis equipment where stable speed control and predictable torque response are required.

Mechanically, the motor uses size code 134, which gives it a stator diameter suited to mid-range output requirements. The length code C indicates the active stack height used for its torque range. Heat is removed by an axial blower that is factory installed and supplied through the same connection system used for the stator leads. The housing is prepared for flange mounting, so it attaches directly to a machine surface without a foot plate. Position and speed are sent to the drive through digital servo feedback, allowing the controller to regulate the DS winding accurately during changing load conditions.

The electrical inlet uses a single top power connection, and the cable routing is directed toward Side B to simplify layouts where several motors share the same wiring path. The motor is supplied without a holding brake, so any load that must remain fixed at standstill requires external restraint or drive-generated holding torque. Its shaft is delivered without a shaft seal, which means the surrounding machine enclosure must keep coolant, oil, and other contaminants away from the bearing area. There is no shaft end on the opposite face, which reduces overhung mass for direct-coupled arrangements, and the blower receives its auxiliary supply through the existing connector.

View Datasheet