2AD134B-B35OA2-FS06-C2N2

Product Description:

The 2AD134B-B35OA2-FS06-C2N2 is a magnificent servo motor masterfully crafted by Rexroth Bosch Indramat under the 2AD motor family. Known for its efficient and dynamic cooling system, this servo motor operates well at a wide ambient range. Specifically, the 2AD134B-B35OA2-FS06-C2N2 employs an axial blower cooling system. Unlike other 2AD134B motors, however, this servo motor has an intake cooling system, which directs air to flow from the motor’s shaft side to the rear side. In contrast to the default blowing system, which directs air from the rear side to the shaft side, the intake cooling system generally has reduced noise levels and better dust management in some cases.

To function properly, the 2AD134B-B35OA2-FS06-C2N2’s blower must be connected to a three-phase power supply with a nominal voltage of 460 V. During operation, the motor blower may consume up to 170 VA. Compared to blow-type cooling systems, suction-type cooling systems have a lower mean air volume of 850 cubic meters per hour. Since the motor blower is open during operation, it has a lower protection category than the motor itself. While the motor has a protection class of IP 65, the motor blower has a lower protection grade of IP 24. Considering the motor’s cooling system, the machine has an overall thermal time constant of 45 minutes.

The 2AD134B-B35OA2-FS06-C2N2 has an insulation class of 155 or F. For servo motors and machines, the insulation class determines the maximum hotspot temperature that the equipment can withstand. With an insulation class of 155, this motor can withstand a maximum hotspot surface temperature of 155 degrees Celsius for a short period of time. During operation, the recommended ambient temperature range for this motor is between 0 and 40 degrees Celsius.