Product Description:

The 2AD132D-B35OR2-BD01-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. In automated machining centers, printing lines, and material-handling stations, this motor supplies constant torque to servo drives and spindle inverters, converting electrical power into continuous rotary motion for mechanical loads. It is commonly used where controlled acceleration, stable running speed, and dependable operation are required across repeated production cycles. Its standardized frame supports integration into multi-axis assemblies.

The stator winding is classified with code BD, which indicates resistance and inductance values that match the current ratings of Indramat digital drives. Frame size code 132 sets the core diameter and bolt pattern, while length code D extends the active iron to raise continuous output shaft power. Heat is removed by an axial blower that forces air along the housing fins, allowing the motor to maintain nominal temperature rise during cyclic duty. Installation flexibility comes from flange and foot mounting, so the unit can be fastened either to a base plate or directly to a machine wall without adapters. Standard service-life bearings support the rotor and accommodate radial forces from belt or coupling loads.

Power enters the housing through a cast terminal box located on the top of the frame, and the cable gland points to the right when the mounting flange faces the operator. Because the rotor is delivered without a holding brake, position retention during idle periods must be handled by the drive or an external mechanical lock. Side B is machined without a shaft end, which shortens the overall length and removes overhung mass on the non-drive side. The keyed drive shaft is balanced with the entire key and does not include a shaft seal. Vibration grade R is suitable for general-purpose industrial equipment.