Product Description:

The 2AD132D-B35OB2-AS11-B2N1 is an AC induction motor built by Bosch Rexroth Indramat and belongs to the 2AD 3-Phase Induction Motors series. Designed for automated plant equipment, it converts electrical energy from a matched inverter into rotary mechanical power for pumps, presses, and material-handling axes. The motor integrates rated windings, cooling, and an integrated brake so that it can be installed as a complete drive element in modular motion systems.

The cooling system uses an axial blower mounted on the stator housing, and forced airflow keeps the winding temperature within permissible limits during continuous operation. Frame size code 132 indicates a 132 mm-class housing and matches standard IEC machine interfaces of the same size. For holding load positions when power is removed, the motor incorporates an electrically engaged clamp brake that applies torque as soon as supply voltage is cut. Installation options are widened by flange and foot mounting, allowing the same model to be fixed either on a base plate or directly to a gearbox face. Dynamic operation is rated to vibration grade R, which indicates balancing suitable for high-speed service.

Internal rotor bearings use standard bearings, so the bearing dimensions follow common DIN sizes. Length code D indicates an extended active core that increases continuous torque compared with shorter variants while preserving the 132 mm frame outline. For streamlined wiring inside multi-motor cabinets, the three-phase power connector faces side B of the housing and exits at the top, keeping conduits clear of floor-level coolant lines. The winding code AS matches the stator with suitable 2AD drives, and the machined shaft is supplied without a second shaft end and without a shaft seal but is balanced with the full key to simplify coupling alignment.