Product Description:

The 2AD132D-B35OB1-BD03-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. As a three-phase drive, it converts electrical power into continuous rotary motion for conveyors, packaging machinery, and other automated axes that require stable speed and dependable torque. The motor is intended for industrial duty where continuous operation, controlled acceleration, and consistent mechanical output are needed across a wide range of machine layouts.

Cooling is provided by an axial blower, which forces air through the housing to remove heat from the stator area during operation. Position information is delivered through high-resolution motor feedback, allowing a compatible drive controller to maintain accurate speed regulation and responsive axis control. With a frame size of 132, the motor uses mounting dimensions that fit equipment arranged for this motor class. The housing is prepared for flange and foot mounting, so it can be attached either to a machine face or to a base surface. Power conductors leave the terminal box on side B, which can help when cable routing space is limited on the opposite side of the installation.

The terminal box is mounted on the top of the frame, which keeps the connection point accessible and away from debris that may collect below the motor. The rotor is supplied without a holding brake, so any load-holding function must be provided by the drive system or by external mechanical means. Vibration severity is rated as class R, making the motor suitable for installations where balanced operation is important for connected equipment. The electrical design uses winding code BD, which matches the motor to its intended electrical and thermal operating range. Standard bearings support the shaft arrangement, and the output is provided without a shaft seal or a side-B shaft extension for applications that use only one drive end.