2AD132D-B35OB1-AS23-B2V1

Product Description:

Offered by Bosch Rexroth Indramat, this 2AD132D-B35OB1-AS23-B2V1 asynchronous AC motor comprises heavy-duty bearings. The motor allows master-slave operation when it works as a servo drive. This product permits a direct connection to the drive controller. This device faces radial forces vertically with the foot mounting options. This unit’s shaft seal helps in increasing its protection rating. Its assembly, installation, and operation should take place as specified in its manual. The motor may pose a health hazard to people with metal implants or pacemakers.

This product’s operation isn’t allowed even for a short period if the ground wire connection is not permanently connected at the appropriate points. The device is likely to portray faulty control as a consequence of a malfunctioning encoder or sensor. This unit’s holding brake is not meant to be utilized as a safety brake. It is necessary to do a measurement of the holding torque of its brake and do a grind-in if needed before the initial setup. The motor’s maximum operating temperature is not intended to be higher than 55 °C. This product’s reduced data upon deviating from the ambient conditions must at no time be exceeded by the application. The device’s shaft seal offers protection only against splashing fluids. Its protection class and installation position must be considered when planning the system.

The asynchronous AC motor comprises reduced grease lifetime for its bearings with vertical installation. This product features cooling using air currents guided over its surface through shrouds. The device gets overloaded thermally with dirt accumulation on its blowers. This unit’s brake is used when a drive-internal brake check is performed. Its encoder and power connections are on the same side.