2AD132D-B35OA2-BD03/S013
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911232445
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Bosch Rexroth Indramat AC Motor in the 2AD Series. This Motor is an Asynchronous Motor Type that has a Motor Size of 132, and a Motor Length of D."
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD132D-B35OA2-BD03/S013 is a B35 flange and foot based motor with option to integrate with drives for extensive motor speed range in series of induction motor. Installation at higher altitudes of up to 1000 meters above sea level is permitted without derating, but above that, output adjustments must be made.
The total mass of the 2AD132D-B35OA2-BD03/S013 motor is 135 kg, while the rotor inertia is measured at 1.18 x 10-2 kgm2. Mounting is standardized according to ISO 9409-1 flange and foot configurations, promoting secure mechanical attachment. The nominal operating voltage is rated at 217 V. The nominal current during standard operation averages 80 A. Thermal endurance is ensured by Class F insulation materials, rated for continuous operation at internal temperatures up to 0 to 45 degrees C.
The 2AD132D-B35OA2-BD03/S013 motor has a high-resolution feedback and comes with no holding brake. The sound pressure level of the motor is 75 dB at 1 meter distance. As the motor is demanded to operate continuously in industries, this causes heat issues that is catered using an axial blower in this motor with sucking configuration and air direction from A to B. For motors operating in extremely dirty conditions, Rexroth recommends routing clean ventilating air via air channels to the blower to maintain cooling efficiency. In this motor, the power wire cross-section is 25 mm2 with ready-made cables for direct connection must be of standard of IKL 0174 / IKG 0174, whereas the components for standard cables for direct connection on the motor is INK 0207 / INK 0607. In similar context, the Standard cables for intermediate clamping to terminal strip on the motor is IKL 0172 / IKG 0172 where IK represents standard cable, L represent flexible power cable, and G is for control cable.
