Product Description:

The 2AD132D-B35OA1-AS03-A2N1 is an AC induction motor from Bosch Rexroth Indramat in the 2AD 3-Phase Induction Motors series. It is intended for automated machinery and converts three-phase electrical power into rotary motion for conveyors, presses, and packaging equipment. As an induction design, torque is produced by rotor currents created from the stator field rather than by permanent magnets. Integrated motor feedback channels send operating data to the drive controller, which supports closed-loop speed regulation and coordinated axis movement in multi-axis systems. When paired with a compatible inverter, the motor can serve both speed-controlled and positioning duties where repeatable motion is required.

Cooling is provided by an axial blower, which forces air across the stator so the motor can sustain rated current during continuous operation. This cooling method helps limit heat buildup even when the shaft runs at lower speeds. Position and speed data are supplied through high-resolution motor feedback, allowing the drive to make fine corrections during synchronized motion. The motor uses frame size 132, giving it the mechanical envelope associated with that housing size. It supports flange and foot mounting, so it can be attached to either a machine base or a face-mounted connection. Power conductors enter through a terminal box on side A, which can simplify cable routing when the shaft faces the operator.

Inside the terminal box, the electrical lugs are placed at the top, which helps keep cable bends clear of the mounting area. The output is a smooth shaft without a seal, making it suitable for installations where sealing is handled elsewhere in the machine. No secondary shaft end is provided, and standard bearings support general radial loading without adding extra overhung mass. The motor is supplied without a holding brake, so stopping and load retention must be handled by the drive or by external mechanical means. Dynamic balance meets vibration grade R for stable running on rigid bases. Winding code AS corresponds to the stator arrangement used with compatible Indramat inverters for the intended voltage and current range.