Product Description:

The 2AD132D-B35OA1-A503-B2B1 is an AC induction motor manufactured by Bosch Rexroth Indramat in the 2AD 3-Phase Induction Motors series. As a line-powered drive element, it converts electrical energy into rotary motion for machine tools, material-handling axes, and packaging equipment. When paired with a suitable drive, the motor supports steady torque output and stable speed control across repetitive industrial duty cycles. That operating profile is common in systems where spindles, conveyors, or indexing mechanisms must run reliably under changing loads.

Cooling is provided by an axial blower, so forced airflow carries heat away from the frame during continuous operation. Rotor position is monitored through high-resolution motor feedback, which gives the inverter precise motion data for speed regulation and slip monitoring. The motor uses frame size 132, matching common mounting dimensions for this class. It supports flange and foot mounting, so the housing can be installed by face attachment or base mounting. For straightforward cabinet routing, the power leads enter at the top of the terminal box. This layout helps simplify integration where enclosure height is available and cable bends need to remain gradual near the connection point.

The active length code D indicates an extended lamination stack that increases continuous power within the same frame diameter. Incoming supply conductors are routed to side A, keeping the connection area on one side of the machine. At the drive end, the motor uses an entire-key balanced shaft without a shaft seal, which supports keyed couplings while keeping friction low. This shaft arrangement suits clean installations where an external seal is not required at the coupling side. Dynamic behavior follows vibration grade R, which supports smooth running in high-speed applications. Because the motor is supplied without a holding brake, the axis must rely on drive torque or a separate mechanical device when stationary.