Product Description:

The 2AD132D-B35LB2-AS11-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat and belongs to the 2AD 3-Phase Induction Motors series. Designed for continuous drive duties in machining centers, packaging lines, and general material handling, the unit converts electrical energy into rotational motion for pumps, gearboxes, or belt systems within automated cells. Its construction follows the manufacturer’s modular platform, allowing straightforward integration with Indramat inverter drives and giving OEMs a consistent mechanical envelope across the 2AD family.

For sizing, the motor uses frame code 132, indicating a stator outside diameter near 200 mm and ensuring compatibility with DIN-standard interfaces. The length designation D adds active lamination depth, increasing continuous torque capability without altering the footprint. Thermal management is handled by an external Axial Blower that forces air along the housing ribs; this maintains winding temperature under rated current and allows operation in sealed cabinets. Mechanical fastening is flexible because the housing supports flange and foot mounting, so axial loads or baseplate loads can be accommodated with the same unit. A safety-rated, electrically engaged clamp brake locks the shaft when power is removed, preventing run-down of vertical axes during emergency stops.

Electrical terminations are routed on side B of the stator, and the conduit box sits left of the stator housing when the observer faces the drive end. This orientation simplifies cable runs in multi-motor racks. The output shaft is delivered balanced with an entire key, lowering residual vibration when the motor is coupled directly to precision spindles. The motor meets R vibration grade, supporting installations that must meet ISO class limits for smoothness. Standard bearings and the AS winding code complete the configuration by indicating bearing life expectations and the electrical impedance profile required by Indramat drives.