2AD132D-B05OF1-BD03-E2N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911267122
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Bosch Rexroth Indramat AC Motor in the 2AD Series. This Motor is an Asynchronous Motor Type that has a Motor Size of 132, and a Motor Length of D."
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
If you require a high speed, high torque servo motor, then the 2AD132D-B05OF1-BD03-E2N1 from Rexroth Indramat is a servo motor that is capable of providing both a high speed of 7500 rpm at maximum level and a nominal torque rating of 140 Nm while operating at 290 volts AC and requiring a current of 54 amperes at least. To power this motor, use a power supply module or direct supply that can provide the required voltage for operation along with a 3 phase configuration that is 120 degrees apart and is required to power each pole of the motor that is necessary for generating the required electromagnetic fields needed for spinning the motor using induction phenomenon.
The axial blower that is attached to the rear end of the servo motor helps create an air channel that allows the ambient air to travel into the motor enclosure with the help of this blower fan from side B to side A which is from back to the front of the servo motor. This motor comes with a winding that has the designation name BD that draws around 80 amperes of current and requires 217 volts AC current to function. This winding has a resistance rating of 37.1 ohms and comes with an inductance rating of 73 mH that helps smooth out and stabilize voltage required for operating this motor by suppressing noisy signals in the supply.
To help make this motor run as efficiently as possible, it is always recommended to install it in an area with a continuous flow of air for good ventilation to help keep this servo motor as cool as possible to ensure efficient and smooth operation. The mounting of this servo motor is possible with the help of a compatible flange mounting option.
