2AD132D-B05OB1-BD13-B2N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911253611
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Bosch Rexroth Indramat AC Motor in the 2AD Series. This Motor is an Asynchronous Motor Type that has a Motor Size of 132, and a Motor Length of D."
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the 2AD132D-B05OB1-BD13-B2N1 that has universal bearings, and the vibration severity grade of the motor is regular. It is an asynchronous motor that is equipped with an electrically engaged holding brake. The peak speed of the motor is 7500 rpm, and the rated speed is 1500 rpm. The holding brake has the potential to brake the motor at its maximum speed of 7500 rpm. The maximum braking energy of this holding brake is 30k Ws, and the release delay is 140 ms. However, the mass of the electrically engaged holding brake is 4 kg.
The moment of inertia of the rotor of this brake is 0.02 kgm2. The nominal terminal voltage of the operating electrically engaged holding brake is 24 V DC with a 10 percent tolerance level. The peak braking energy consumed at that time is 30,000 J. As per DIN 40050, the motor housing and covers are protected from penetration by solid objects and water. It is advised to ensure appropriate lubrication at the points of contact. The lubricant is simultaneously a coolant.
The allowable mounting positions of the 2AD132D-B05OB1-BD13-B2N1 are IM B 5, IM V 1, and IM V 3 as per DIN IEC 34-7. The ambient temperature of these machines must remain between 0 C to 45 C with the altitude installation up to 1000 meters above sea level for optimal operation of the motor. The motor has an integrated NTC thermistor for thermal overloads and temperature monitoring. The average air volume of the air stream from B to A is 1000 m3. According to EN 60204, the minimum connection cross-section area is 25 mm2, and the power terminal output is on top. The output shaft is the whole keyway and comes without the sealing rings.
