Product Description:

The 2AD132D-B05OB1-BD03-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. Intended for fixed-speed or inverter-driven operation in manufacturing cells, it supplies the mechanical power needed for conveyors, spindles, and auxiliary axes. The motor’s electrical design lets it operate as a torque source within closed-loop motion systems, supporting reliable startup, continuous rotation, and externally commanded braking in automated environments. When paired with a compatible drive, it can respond smoothly to changing load demands while maintaining stable operation through repeated production cycles.

The motor has size code 132 and length code D, a combination that sets the active core length and stack diameter for the required power output. Heat is removed by an integrated axial blower, so rated current can be sustained without excessive temperature rise. Installation is simplified by flange mounting, which aligns the stator housing directly to a machine wall. Power enters through a connection block at the top, keeping cable bends short in vertical cabinets. Standard bearings support the rotor, while the drive-side shaft is balanced with the entire key and is supplied without a shaft seal. The non-drive side is left without a shaft end.

The motor uses high-resolution motor feedback to deliver precise speed information to the controller, enabling fine torque regulation even at low frequencies. Three-phase conductors are routed to side B, a layout that separates power cables from signal wiring and eases access to the connection area. Dynamic behavior is classified under vibration grade R, indicating an enhanced balance quality that helps protect attached gear trains. Electrical characteristics are matched by winding code BD, and the unit is supplied without a holding brake to keep inertia low for rapid deceleration commanded by the external inverter. Without a holding brake, the rotor assembly remains lighter than a comparable braked version.