Product Description
The 2AD132D-B05OA3-AS03-D2N1 is a spindle drive motor used in heavy industrial machines. The motor is built by the Bosch Rexroth Indramat company; it features a balanced output shaft that has a key and seal . Also, the motor does not have any holding brakes. The shaft seal is a rubbing seal. Wear and frictional heat typically occur at the lip of the seal. To minimize wear, it is crucial to ensure proper lubrication at the points of contact. To prevent damage to the seal, the points of contact should not be allowed to run dry. In addition, the lubricant is simultaneously a coolant. Hence, it helps to dissipate the frictional heat occurring at the point of contact of the shaft seal.
The motor weighs about 135 kilograms before the operation; the 2AD132D-B05OA3-AS03-D2N1 motor must be mounted in the machine using only the flange method. The installation must be done vertically and liquids must be prevented from penetrating into the output shaft. Aside from liquid, the 2AD132D-B05OA3-AS03-D2N1 motor must also be prevented from excess heat. The power output of this motor during operation is about 22 kilowatts; it also maintains a torque output of about 140 Newton meters. It also needs rotor inertia of 0.118 kilogram per square meter. This product does not require any maintenance operation; it can simply be installed into the servo system and start-up for optimum operation.
The motor must be operated at an ambient temperature of 0–45 degrees Celsius and installed at an altitude of no more than 1000 meters above sea level. These conditions help to minimize heat production and ensure optimal performance. Additionally, the 2AD132D-B05OA3-AS03-D2N1 motor is equipped with a radial blower for self-cooling. This radial blower dissipates heat by blowing off the heat out of the motor rather than suction.
Wake Industrial Warranty
