Product Description:

The 2AD132D-B05OA1-AS03 belongs to the 2AD 3-Phase Induction Motors series engineered by Bosch Rexroth Indramat for machine tools, packaging lines, and material-handling axes that require continuous rotary motion and dependable torque delivery. When paired with a compatible drive, the motor converts three-phase electrical energy into mechanical rotation for automated equipment. This operating role suits conveyor belts, spindles, and gantry positioning stages used throughout production cells.

This model is supplied without a holding brake, so any load-holding requirement must be met by external clamping or drive torque. An integral axial blower forces air along the housing to remove heat generated in the stator windings during high duty cycles. Position and speed are monitored by a high-resolution motor feedback device, allowing closed-loop control that minimizes following error at both low and high speeds. The motor uses length code D, which indicates a longer active iron and copper section than shorter versions. It also uses size code 132, indicating the frame diameter used for the mounting interface and shaft height. For electrical matching, the unit carries winding code AS, which gives the coil impedance needed for rated performance with the specified inverter current and voltage limits.

Mechanical attachment uses flange mounting, permitting direct fastening to gearboxes or machine plates without additional brackets. Power conductors exit toward Side A, and the terminal box is located on the top of the frame to keep cable routing clear of coolant or chip trays. As an AC induction motor, the rotor develops torque through induced currents rather than permanent magnets. This operating principle supports rugged service over a broad temperature span and avoids demagnetization concerns.