Product Description:

The 2AD132C-B35OB1-CS26-B2V1 belongs to the 2AD 3-Phase Induction Motors series from Bosch Rexroth Indramat. It is an AC induction motor built to deliver continuous rotary torque for conveyors, presses, and automated machining centers where closed-loop speed regulation is required. When paired with a matching drive controller, the motor supports precise acceleration, stable running speed, and dependable duty cycles in harsh industrial environments.

The drive end uses heavy-duty bearings that can handle high radial and axial loads during prolonged production shifts. Stopping is provided by an electrically released brake that engages automatically when power is removed, which helps hold vertical axes without auxiliary clamps. Heat is removed by an axial blower, so the stator windings remain within thermal limits even when the motor runs at low shaft speeds. Position and velocity are returned to the drive through digital servo feedback, allowing tight speed regulation and quick fault response. The motor has frame size 132, and length code C indicates the active iron stack used for its continuous output range.

The housing supports flange and foot mounting, so the motor can be installed by face mounting or by base mounting on rails. Dynamic behavior is assigned vibration grade R, which indicates rotor balancing for reduced structure-borne vibration. Electrical characteristics correspond to winding code CS, a coil arrangement suited to medium-voltage, constant-torque duty. The three-phase power leads exit on side B at the top of the terminal box, which can simplify routing where cable trays run above the motor. The non-drive side has no shaft end, and the drive shaft is balanced with a full key but is supplied without a shaft seal, so added sealing is needed where liquid exposure is possible.