Product Description:

The 2AD132C-B35OA1-CS03-A2N2 is manufactured by Bosch Rexroth Indramat and belongs to the 2AD 3-Phase Induction Motors series. It is an asynchronous drive component intended for constant-speed or vector-controlled applications such as machine tools, printing lines, and general material-handling stations. By delivering regulated mechanical power from a three-phase mains supply, the unit serves as the rotating element of a closed-loop axis when paired with an appropriate inverter and feedback interface.

Cooling is provided by an integrated Axial Blower, a forced-air system that draws ambient air through the housing to keep the stator windings within their thermal limit. The motor has size code 132, indicating a frame diameter that balances torque output with compact installation space, and length code C, which indicates an active stack height for additional continuous power. Position data are supplied through high-resolution motor feedback, allowing tight current regulation and low-speed accuracy. Mechanical attachment uses flange and foot mounting, so the same model can anchor to a baseplate or a face panel without adapters. Dynamic behavior is categorized under Vibration Grade S, which indicates reduced residual imbalance for smoother operation in precision assemblies. The rotor uses standard bearings to support radial and axial loads encountered during belt-driven or direct-coupled service.

Electrical termination routes the leads to Side A, and they rise to the Top of the terminal box to simplify cable runs inside vertical cabinets. Internally, the stator uses winding code CS, which is suited to the voltage and frequency ranges used by compatible drive systems. The output shaft is a smooth shaft without a seal, reducing friction losses where external protection is unnecessary, while the B-side is supplied without a shaft end to accommodate close-mounted encoders or fans. The design omits a holding brake, so external clamping or drive torque must secure the load at standstill.