Product Description:

The 2AD132C-B35OA1-CS01 is an AC induction motor produced by Bosch Rexroth Indramat and assigned to the 2AD 3-Phase Induction Motors series. In industrial automation tasks, it supplies continuous three-phase torque to pumps, extruders, and material-handling axes under inverter control. The motor interfaces with modular drive systems, allowing closed-loop speed regulation without extensive redesign. Its layout supports standard feedback devices and helps protect internal windings against thermal overload during sustained duty cycles. That makes it suitable for processes that must maintain stable rotation as load demand changes through the cycle.

The motor uses size code 132 and length code C, a combination that balances torque capacity with installation depth. Heat is expelled by an integrated axial blower, so full output can be maintained even when cabinet airflow is limited, and forced airflow helps stabilize temperature during low-speed operation under load without increasing the motor footprint. The housing provides both flange mounting surfaces and a base for foot mounting, allowing alignment either on gearbox faces or on machine beds without extra adapter plates.

Electrical terminations are arranged so the power leads exit to side A and are routed from the housing’s top, keeping conductors clear of floor-level debris and simplifying drip-loop construction. The stator winding uses code CS, which helps match impedance and current ratings to a corresponding 2AD inverter and supports predictable motor behavior in closed-loop operation. Because the motor is supplied without a holding brake, any position-holding requirements must be handled by external mechanical locks or by the drive operating in torque mode. This arrangement is suitable for installations where braking is managed elsewhere in the axis design.