2AD132C-B05OR2-CS03-B2N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911260639
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
Bosch Rexroth Indramat AC Motor in the 2AD Series. This Motor is an Asynchronous Motor Type that has a Motor Size of 132, and a Motor Length of C."
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD132C-B05OR2-CS03-B2N1 asynchronous AC motor from Bosch Rexroth comes with two type plates. This motor portrays S1 and S6 operating modes. The product depicts tactile or audible vibrations if its mount is loose or the bearings are worn out. This device tends to malfunction if there is a problem with the encoder or encoder connection. The unit may need its blower to be dismantled for maintenance measures. Its mechanical and electrical connections have to be checked once every 1,000 operating hours.
This motor delivers maintenance-free operation if it is run within the given operating conditions. The product must be secured against falling or movements before its mechanical connections are disconnected. This device is part of a drive system along with the drive controller and a control. The unit comprises two temperature sensors or NTC thermistors permanently installed in its windings. Its nameplate must not be detached from the housing. This motor comprises a cable with a coupler on its housing for the encoder connection. The product has no holding brake. This device is balanced with a full key. The device should be connected with the manufacturer's readymade cables for best results. The unit can be fitted with 2K series or 58 series gearboxes on the output shaft. Its utilization factors must be multiplied when the ambient operating temperature and installation altitude are exceeded.
This motor supports only low axial loads. The product must not undergo maintenance measures when it is operated. This device has a surface temperature of more than 60 degrees C when it is in use. The unit has no shaft seal around the output shaft. Its blower has an IP 24 protection. This asynchronous motor must be connected only after it has been mechanically mounted.
