2AD132C-B05OB2-BS03-D2N1

Product Description:

The 2AD132C-B05OB2-BS03-D2N1 asynchronous AC motor produced by Bosch Rexroth must not be operated without the drive controller. This motor must be disassembled only after releasing its pressure. The product has a continuous torque that is directly proportional to the length of its frame. This device should always be operated with a blower. The unit uses an encoder for its feedback. Its shaft height is the distance from the base of the foot to the middle of the output shaft. This motor is balanced with a complete key.

The product has no stub shaft on Side B. This device is equipped with deep-groove ball bearings. The unit comes with two nameplates. It generates a constant torque until the rated speed. This motor relies on its feedback to measure the position of the rotor and signal it to the drive. The product is meant to be operated within the specified ambient operating conditions. This device features protection against the penetration of water and solid objects. The unit has an IP 54 protection class for its blower. It can be installed vertically with the output shaft facing upward or downward.

This motor is prone to damage to its output shaft during a powerful reversing operation. The product must have sufficient lubrication at the points of contact with the shaft seal. This device supports only very low axial loads. The unit is associated with a reduced balanced class. Its electrical connections comprise a power connection, a blower connection, and a feedback connection. This asynchronous AC motor shuts down automatically when its thermistor records a surface temperature of 155 degrees C.