2AD132C-B05OB1-CS23-A2N1

Product Description:

With a peak speed of 7500 rpm, the 2AD132C-B05OB1-CS23-A2N1 from Rexroth is a perfect Asynchronous motor with a nominal torque rating of 96 Nm. This servo motor requires 279 volts AC nominal to operate over a 3-phase voltage input configuration and supports both star and delta connection configurations. If the user wants faster start-up speeds, they can opt for a Delta connection of the motor's input voltage, while if the desired operating condition is more balanced with limited start-up current, the motor can also be configured using a star connection that consumes less start-up current.

This motor has winding designation CS and has a centering diameter of 132 mm, which is also the size for its flange using which the operator can mount the motor, allowing the motor to be stable during operation with less vibration thanks to the reinforced design of the motor. The length of the frame is of length C, allowing this motor to be mounted in confined spaces. This motor model offers an electrically released holding brake that has a holding torque of 30 Nm, requiring 24 volts DC to operate and drawing approximately 1.3 Amperes of current in order to be engaged when needed.

This servo motor comes with the A2N1 configuration that comes with a smooth shaft but not with a shaft seal. The motor does not come with a second shaft end but does rely on a high-resolution feedback system in order to control the movement of the motor based on a closed-loop control system. This motor is IP 67 certified, allowing it to be installed in dusty and wet environments as it is sealed, keeping the motor well protected.