Product Description:

The 2AD132C-B05OA2-BS03-B2N2 is an AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It converts three-phase electrical energy into continuous rotary motion for spindles, conveyors, and indexing tables used across automated manufacturing lines. When paired with Indramat drive controllers, the motor supports vector-controlled speed loops that help keep torque output stable under dynamic loading. It is intended for continuous industrial duty in systems that require dependable speed regulation across changing loads. Because it uses induction principles rather than permanent magnets, the design tolerates elevated temperatures and remains suitable for long-duty industrial service.

The motor is cooled by an Axial Blower, which forces air along the stator housing so winding temperature stays within permissible limits during full-load operation. Position feedback is generated by high-resolution motor feedback, which provides fine increments to the drive for precise vector control. The frame follows size designation 132, which corresponds to the flange diameter and bolt circle used when attaching the unit to machinery. The motor uses flange mounting for direct attachment to gearboxes or machine walls without additional foot plates. The power leads exit toward side A, and their terminals are located on the top of the stator, which can simplify cabinet cable routing. A standard bearing set is pre-lubricated for the expected service life.

The rotor stack corresponds to length code C, giving the motor a medium axial dimension that balances torque output with overall mass. No holding brake is fitted, so external clamping must be used when zero-speed torque alone cannot secure the load. The primary shaft is machined with a full key and is delivered without a shaft seal, while the second shaft extension is omitted. The omitted second shaft extension leaves only one usable output end. Dynamic behavior is classified under vibration grade S, which limits displacement for precision tooling. Electrical characteristics follow winding code BS, matching resistance and inductance values to compatible Indramat power modules for efficient current use.