2AD132C-B05OA1-CS03-D2N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911241521
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Bosch Rexroth Indramat AC Motor in the 2AD Series. This Motor is an Asynchronous Motor Type that has a Motor Size of 132, and a Motor Length of C."
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD132C-B05OA1-CS03-D2N1 asynchronous AC motor produced by Bosch Rexroth must be stored and transported only in the horizontal orientation. This motor comes with two type plates attached to its housing. The product has a high resolution for its feedback. This device requires minimum maintenance because of its asynchronous nature. The unit has no support for foot mounting. Its feedback is used to measure the position of the rotor. This motor has no shaft extension.The product is protected by its housing that is constructed and designed as per DIN 40 050 specifications. This device is not affected by a jet of water sprayed onto its housing using a nozzle. The unit encompasses bearings with a lifespan of 20,000 operating hours as per ISO 281 specifications.
It is designed to withstand very low axial shaft loads. This motor must be operated such that the permissible load limits are not exceeded. The product is not recommended for residential use. This device should not be operated without a supporting drive controller. The unit should be mounted such that there is a sufficient supply of air for cooling after the mounting. Its thermistor connection is incorporated into the power connection.This motor must be equipped with an air channel for conducting clear air if it is operated in very dirty environments. The product can be operated in weather-protected locations in stationary mode as per IEC 721-3-3 specifications. This device must be installed such that it is not subject to ambient conditions outside the applicable protection class. The unit encounters radial and axial forces on the shaft and bearings during its operation. It must be ensured that there is a distance of at least 80 mm between the machine in which the motor is installed and the blower screen. This asynchronous AC motor is balanced dynamically as per DIN ISO 2373 specifications.
