2AD132B-B35RA2-BS01

Product Description:

For high-power applications, the 2AD132B-B35RA2-BS01 servo motor from Rexroth is a perfect piece of industrial equipment capable of generating a rotational torque force of up to 96 Nm while consuming a nominal current of 45 Amperes. This motor requires 168 volts AC to operate with a 3-phase input configuration since this motor has a 3-pole design. The input frequency of the operating voltage has a range between 50 to 60 Hz, but users can vary the input voltage frequency for the 3 poles while staying within the specified frequency range.

The blower on this motor is a radial type blower placed on the top, which helps push ambient air directly onto the coil, helping it cool down at a much faster pace. The power and connection terminals of the motor are present on the top of the motor, making it easy for the operator to connect wires or perform maintenance tasks even when the motor is installed in a constricted space. The motor has a diameter of 132 mm and a size B, making its design compact and easy to fit.

To control the motor shaft accurately, the 2AD132B-B35RA2-BS01 comes with a digital encoder that allows the motor to place its shaft by counting the number of steps needed to reach a specific angle or position. The encoder uses the EnDat 2.1 communication protocol for a robust and secure serial communication process, allowing the motor to be controlled without any errors. This servo motor relies on a closed-loop configuration of the control system, which is one of the most accurate types of control system configurations, continuously reducing the size of error in the output with the help of feedback.