Product Description:

The 2AD132B-B35OR1-BS03-A2N2 is an AC induction motor manufactured by Bosch Rexroth Indramat and belongs to the 2AD 3-Phase Induction Motors series. As a main spindle or auxiliary drive, it converts electrical energy into rotational motion for positioning, conveying, or cutting tasks within automated machinery. The motor’s stator windings are energized by three-phase power, while rotor currents deliver torque without mechanical commutation, making the unit suitable for continuous-duty service in industrial automation lines that require reliable speed control through matched drive converters.

Thermal management is provided by an axial blower mounted on the housing, forcing cooling air along the frame to maintain permissible winding temperature during sustained load. A high-resolution motor feedback encoder is integrated for precise rotor angle reporting to the drive controller, allowing tight speed loops and accurate positioning. Dimensional identifiers place the active parts in the 132 frame and the length category B, which correspond to the motor’s physical size and active stack length. Installation flexibility is enhanced through flange and foot mounting, permitting either base or face attachment to machine structures. Standard bearings support radial and axial loads, and the motor is supplied without a holding brake, so static holding torque must come from the drive or external mechanics.

Electrical terminations are accessible from the top of the stator housing, and the outgoing power cable is oriented to the right, simplifying cabinet layouts that run conduits horizontally to the drive cabinet. The rotor engages driven equipment through a smooth shaft without a shaft seal, and there is no shaft extension on the non-drive side, which removes unused overhang mass. Dynamic balance complies with S vibration grade, helping limit residual vibration during high-speed operation. Winding code BS corresponds to the voltage constant and current rating used with compatible drive modules.