Product Description:

The 2AD104D-B05OA4-FS06-A2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It serves as the primary rotary actuator in automated machinery where constant torque and reliable speed control are required. By combining a built-in cooling fan and servo-grade position feedback, the motor delivers continuous mechanical power while supporting closed-loop regulation from the drive controller. Typical applications include conveyors, printing units, and material-handling stations that depend on dependable continuous-duty motion.

The housing is ventilated by an axial blower powered from a dedicated 115 V source, so the stator temperature remains stable during heavy cycling. Rotor position is reported through digital servo feedback, allowing the drive to correct speed and load disturbances in real time. The motor is prepared for flange mounting, which secures it directly to a machine frame or adapter plate. It uses a 104 frame size, and the power leads exit toward Side A at the top of the housing for layouts that favor upward cable routing. The electrical connection also carries the blower conductors, while standard bearings support radial and axial loads and the motor is supplied without a holding brake.

The output uses a smooth shaft without a seal, and there is no shaft extension on the rear side, which simplifies coupling to belt pulleys or rigid hubs while keeping the overall motor length compact. A dedicated power plug with bayonet locking lets the stator and fan circuits disconnect together through one interface. Dynamic behavior is rated to vibration grade R, which suits machines that allow moderate balancing limits during operation. The motor uses winding code FS, which matches the electrical characteristics expected by compatible drive settings. This arrangement fits automated equipment that needs stable cooling, accurate motion feedback, and straightforward connection of both power and blower circuits.