Product Description:

The 2AD104C-B35OB1-CS06-C2N3 is an AC induction motor built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It is intended for positioning and speed control tasks in feed axes, conveyors, and pump drives where reliable three-phase torque is required. When connected to a compatible drive controller, the motor converts electrical input into controlled rotary motion and supports closed-loop operation in automated machinery. This arrangement makes it suitable for equipment that must maintain stable motion during repeated starts, stops, and speed changes throughout normal production cycles. Sealed mechanical interfaces help protect internal parts during regular industrial service.

The cooling fan is powered by 230 V, so it can operate from common plant power without a special auxiliary source. Rotor position and speed are monitored through digital servo feedback, allowing the drive to correct operating errors in real time. The motor uses flange and foot mounting, which supports either face mounting or base installation on suitable machine structures. Output torque is transmitted through a smooth shaft with a shaft seal, which helps retain lubricant and reduce the entry of contaminants. The motor is rated for S1 duty, which allows continuous operation under a constant load when cooling conditions are maintained.

Cooling is provided by an Axial Blower that moves forced air along the housing, helping the motor maintain stable temperature even at low shaft speeds. The motor has a frame size of 104 and a housing length code of C, which establish its installation envelope and overall proportions. Winding code CS identifies the electrical winding used for this version, so matching drive data can be selected for the motor. Power connection is made through a top-mounted plug oriented toward side B, and the housing layout leaves cable routing accessible from the upper side of the motor. The unit is supplied without a holding brake and without a second shaft end on side B.