Product Description:

The 2AD104C-B35OA1-CS06-E2N2 induction motor is built by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. Intended for automated machine tools, packaging lines, and material-handling stations, the unit converts three-phase electrical energy into regulated rotary motion under inverter control. Its cast housing supports axial cooling and provides both flange and foot interfaces, so the motor can be installed in standard machine frames without additional adapter hardware. The plug-in power connection also helps keep installation straightforward in compact equipment layouts.

Thermal management is handled by an axial blower supplied with 230 V, which forces air along the stator fins to keep winding temperatures within continuous-duty limits. Position and speed are reported through digital servo feedback, allowing the drive to correct load disturbances in real time. Frame size 104 gives the motor the mechanical proportions associated with this size class, while flange and foot mounting allows either face mounting or base mounting from the same housing. Power conductors enter through a top entry on side A by means of a locking plug that also carries the blower supply, which keeps cable routing direct and easy to organize.

Dynamic behavior is further controlled by rotor balancing to vibration grade S, which helps limit transmitted oscillation to connected couplings and gearboxes. The motor is supplied without a holding brake, so any zero-speed load retention must be provided by external mechanical means. The drive-side journal is balanced with a half key, and the opposite end is built without a shaft seal or secondary shaft extension. Standard bearings support the rotating assembly, while winding code CS and motor length code C identify the electrical and mechanical configuration used for this version of the motor.