Product Description:

The 2AD104C-B35OA1-CS06-C2N1 is an AC induction motor built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It supplies continuous rotary power for packaging lines, metal-forming equipment, and other automated stations that run from matched drive controllers. The 2AD platform also supports common mounting and connection layouts used across related motion products, which helps simplify machine integration.

An internal cooling fan powered by a 230 V supply pushes air through an axial blower to keep the stator windings within their thermal limits during sustained duty. Position and speed are returned to the drive through digital servo feedback, enabling closed-loop regulation without external encoders. The motor has frame size 104, which sets the mounting-hole pattern, while length code C indicates a medium lamination stack that balances torque density with overall mass. Installation is flexible because the housing supports flange and foot mounting. Incoming power and blower leads terminate in a molded plug at the top of the housing and point toward Side A, which helps keep cables clear of the driven load. Standard bearings are fitted for general-purpose service, and the motor is supplied without a holding brake, so stopping torque must be provided by the drive or by external mechanical restraint.

The drive end uses a smooth shaft with a shaft seal that helps block lubricant leakage and airborne contaminants, making the motor suitable for light washdown areas. Dynamic behavior is classified under vibration grade R, so the unit meets balance requirements for high-speed operation without excessive structural resonance. Electrical performance is tied to winding code CS, allowing compatible inverter parameters to be selected in the drive. The B-side of the rotor has no shaft extension, which reduces the overall motor length when a second shaft end is not needed.