Product Description:

The 2AD104C-B05OB4-CS06-D2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. Within automated lines, it serves as the primary rotary drive by converting three-phase electrical power into constant mechanical torque for transfer systems, machine tools, and material-forming stations. It is intended for installations where forced air is available, and it supports steady operation in equipment that must maintain reliable rotation through changing process loads. Its overall layout also allows placement near drives and sensors without requiring an unusually deep machine arrangement.

The motor has size code 104 and length code C, which provide a balance between thermal capacity and installation space. A flange mounting interface secures the stator directly to the machine wall and keeps the shaft aligned without external feet. Internal temperature is managed by an axial fan supplied from a dedicated 115 V line, so heat can be removed even when shaft speed is low. Motion feedback is provided through digital servo feedback, allowing the drive controller to regulate current and slip accurately during operation. Standard bearings support the rotor, and the motor comes without a holding brake, so any static load retention must be handled by the driven mechanism. The shaft includes a seal, and the keyway is balanced with a full key.

Power enters on Side B, and the plug is oriented at the top, which helps keep cable routing orderly in a vertical cabinet layout. A molded blower-power connector carries the phase conductors and auxiliary lines in one assembly, reducing cable clutter around the motor connection area. The rotor meets vibration grade R, which is suitable for standard industrial frames without additional isolation in typical installations. Winding code CS matches the electrical characteristics used with common 400 V class drives. The opposite housing has no secondary shaft, allowing closer placement to adjacent machine components.