Product Description:

The 2AD104B-B35OB1-CS06-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. This three-phase unit is used in machine tools, packaging lines, and transfer systems where constant torque and closed-loop speed regulation are required. When paired with a matched inverter, it converts electrical energy into mechanical rotation while integrated feedback and forced-air cooling help support stable operation during continuous industrial duty. That operating profile makes it suitable for axes that must maintain commanded speed while load conditions change during normal production.

Heat is removed by a housing-mounted fan supplied from 230 V, so the blower can remain active whenever control power is available. The cooling method is axial blower cooling, which pushes air through internal passages and helps the motor carry higher loads at low speed. Rotor position is returned through digital servo feedback, allowing the drive to maintain accurate vector-control current loops. The motor has Motor size 104 with a B length code, which gives it the core depth and flange geometry used for this configuration. It uses flange and foot mounting, so the housing can be installed by either face mounting or base mounting. Because the motor is supplied without a holding brake, the driven axis needs an external locking method if it must remain stationary during a power outage.

Power conductors exit through a Side B power connection that uses a top entry plug, which helps keep cable routing compact on the blower side of the housing. The connector uses the series power-plug layout for the motor and blower connection, keeping the wiring arrangement straightforward. Standard bearings support normal radial and axial loads, and the rotor is balanced with the complete key to vibration grade R. The output shaft has no seal, and side B has no shaft extension, which helps reduce overall motor length. Its electrical characteristics are set by winding code CS, which gives the resistance and leakage inductance values expected by compatible 2AD drive modules.