Product Description:

The 2AD100D-B05OB4-AS03-C2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. Designed for cabinet or machine-frame installation, the motor supplies regulated rotational power for handling, packaging, and metal-cutting lines. Its stator, rotor, and forced-air cooling arrangement support continuous torque while keeping internal temperature within acceptable limits during long operating cycles. The motor is suited for automated production equipment that depends on stable speed control and repeatable axis response under changing loads.

Heat is removed by an integrated axial blower mounted in the end shield, and forced airflow along the housing helps maintain winding temperature during high-duty operation. The blower runs from a 115 V supply, allowing direct connection to common control power circuits. Mechanical attachment uses flange mounting, which helps align the frame with the machine surface and supports rigid installation. Power enters through a connector on the top of the housing, with conductors routed toward side B for orderly cable routing. Speed and position signals are provided by high-resolution motor feedback, allowing the drive to maintain accurate closed-loop control during acceleration, deceleration, and load changes.

The rotor is supported by standard bearings and balanced to vibration grade R, which helps limit vibration near precision tooling and coupled transmissions. The motor is supplied without a holding brake, so any static holding torque must be provided by the drive or by external mechanical means when power is removed. A smooth shaft with a sealing ring helps reduce the entry of coolant or debris, and the opposite face is supplied without a shaft end for close-coupled fan installation. The internal winding uses code AS, and the active length works with frame size 100 to provide the electrical and thermal characteristics expected for medium-power automation duties.