Product Description:

The 2AD100D-B05OB1-AS23-B2N1 is a three-phase induction motor built by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It converts electrical energy into controlled mechanical torque for conveyors, tooling spindles, and other motion axes in automated stations. Through its integrated blower and feedback package, the unit supports continuous duty cycles and closed-loop drive regulation in factory automation cells.

This model uses a forced-air cooling scheme driven by an Axial Blower. The blower runs from a separate 230 V supply, so thermal management is independent of the main power feed and allows full-rated output at elevated ambient temperatures. Precise control is supported by high-resolution motor feedback, which returns fine incremental position data to the drive for vector-controlled starting and stable speed holding. The electromagnetic section uses motor size code 100, which corresponds to the frame diameter, while motor length code D indicates a longer active stack for higher continuous torque than shorter frame lengths. Mechanical coupling to a machine frame is accomplished through flange mounting. For streamlined wiring, the power leads exit toward side B and sit on the top of the housing, keeping cables clear of the rotating shaft.

An integral electrically released brake secures the rotor when power is removed, holding vertical loads without external clamping. The three-phase supply is routed through a sealed connector, which provides a protected electrical interface. The motor has Vibration Grade R, which helps limit transmitted oscillations to connected structures. Standard bearings support long service intervals, and the drive-end shaft is delivered without a shaft seal and balanced with its full key. The opposite face has no shaft extension, trimming overhang mass. Winding code AS aligns the stator with common inverter voltage classes, and the compact housing integrates cooling, feedback, and wiring interfaces without increasing external dimensions.