Product Description:

The 2AD100D-B05OB1-AS01-S01 is an AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. This three-phase machine supplies continuous torque to automated machinery such as printing presses, material-handling modules, and process pumps. Within an automation cell, it functions as the primary mover, receiving variable-frequency drive signals and translating them into stable shaft rotation suitable for closed-loop or open-loop control strategies. Its asynchronous design provides inherent slip, allowing load disturbances to be absorbed without compromising commanded speed.

Thermal regulation is handled by an integrated axial blower that forces cooling air through the stator ducts, and the blower is rated for 230 V so it can be powered directly from standard control-cabinet auxiliary circuits. The housing has a size code 100, which corresponds to a 100 mm shaft height and matches standard IEC gearbox interfaces. Because the motor is configured for flange mounting, installation requires only face bolts and does not require foot brackets, which helps reduce alignment error. Electrical power reaches the stator windings through a sealed connector, and the windings carry the manufacturer’s AS code for electrical values matched to 2AD-compatible inverters. This arrangement preserves IP protection around the terminal area.

In this build, the motor is supplied without a holding brake, so stopping or position retention must be achieved by the external drive or by mechanical locks. Overall body length follows length code D, giving additional stack depth for higher continuous power than shorter variants in the same frame. The power lead exits toward side B and is routed upward through the top outlet, which lets the cable bend radius clear adjacent equipment when the unit is placed deep inside a cabinet. This cable orientation also helps the motor fit installations where surrounding structures limit side clearance.